April 8th, 2014 by admin

While mastering has been somewhat of an expanded service over the years, there seems to a lot of confusion over some topics surrounding this important stage of the production process. Being a mastering engineer allows me to explain such misconceptions. Here’s a list of 9 Common Myths About Audio Mastering – Explained.

1. The Louder The Better

This is simply not true! Loudness is not desirable if it means sacrificing sonic integrity. This means pushing your track so loud that it eliminates all your dynamics in the track.

This can be fatiguing to the ear and have a negative effect on listening when doing so for an extended period of time. Use your volume knob. That’s what it’s there for, after-all.

2. Mastering Will Make A Bad Mix Into a Good Mix

Sadly, a poorly mixed track will almost always remain so. In mastering it is very difficult to isolate specific frequencies without affecting all the instruments.

For this reason, it is vital that a mix-down be mixed as best as possible before going into the mastering stage. That means getting the right tone and instruments balanced 110% before sending out for mastering.

3. Mastering Is The “Dark Art” of Making Music

Mastering is considered by most to be mysterious and therefore nobody wants to approach it. However, with experience, reaching sonic accuracy is just knowing what needs to be done to produce the best results.

This doesn’t mean start mastering your tracks by yourself. Which leads me to the next point.

4. I Can Master My Music Myself

It can be difficult to be objective toward your own music! Especially if you master your track in the same listening environment that it was produced in.

For those reasons, it’s better to leave it up to someone with fresh ears, who can be objective, and has the experience mastering tracks. Even top-end mixing studios will have their music sent out for mastering.

5. All the Mastering Engineer Does Is Add A Limiter

Making a track loud is just one part of mastering. An experienced engineer will do his best to ensure the best listening experience.

This can include, but not limited to: Editing & Fades, Track to Track Spacing, Hum & Hiss removal, Stereo Width, Surgical EQ, Tonal EQ, Compression/Parallel Compression, Adjusting the volumes of tracks to match so the whole project feels like a smooth listening experience, ISRC Codes and CD Text just to name a few!

6. Mastering Costs Too Much

Some mastering engineers can be insanely expensive, and rightfully so. They have decades of experience recording the best bands with the most expensive gear. There are also ones with wide varying ranges of experience, equipment, prices, and quality of work.

It is best that you find one that matches your budget and one you’re happy with!

7. Mastering Needs At Least -3db Headroom

I hear this all the time. The truth is, a good engineer will correct any volume issues before it goes into the mastering chain.

I prefer to work with as much signal as possible. Meaning that I like the audio to be as loud as possible before clipping (At 24bits). Then, during the mastering process I will turn the volume down to a preferable level before it goes into my chain.

Anything below -10db in volume I’m afraid might be losing signal and you should aim to submit mixes louder than -10db, but not reaching or exceeding 0db.

8. Mastering Isn’t Required For All Tracks

Actually this one is probably the most true, depending on how satisfied you are with your mix-down. Sometimes mixes come in that are near perfect, and in that case, doing adjustments like EQ, Compression can actually harm the audio.

It’s worth remembering that you should never underestimate a fresh perspective from an objective and experienced set of ears.

9. You Need Top Of The Line Gear

This is false. You need the correct gear and correct ears to make a quality master. In addition, with the options available today in digital music, it is entirely possible to make quality masters on a budget.

Instead, invest in listening, and new techniques, and understanding of good sounding recordings.


Hopefully this list helps to dispel any myths about audio mastering, and serves to clear up any confusion you might have.

What other myths do you guys hear about? Please share your thoughts in the comments.

December 21st, 2011 by admin

We have recently been getting asked some questions that we find have been asked to us more than once, so we compiled a list of frequently asked questions we receive about audio mastering and thought we’d share in hopes of helping you with your sound and future mastering projects. Also, we have some changes coming to our website including a redesign of our (more…)

  • Receive Exclusive Production Tips Directly To Your Inbox
  • Get Exclusive Deals on Mixing & Mastering
  • Become Better at Music Production!